Swimming Pool Test Kit With Coliform
The first thought that comes to mind when we think of safety in swimming pools is drowning slipping and falling etc. But do we really know that the most pr
Swimming Pool Test Kit With Coliform
The first thought that comes to mind when we think of safety in swimming pools is drowning slipping and falling etc. But do we really know that the most probable hazard is contamination by germs viz. bacteria. Therefore the likelihood of us falling prey to these sicknesses is much more than that of drowning etc. Bacteria spread through people who have diarrhoea and as the pool is shared by many swimmers it can be very easily be contaminated. Even best maintained swimming pools can spread illnesses due to these microscopic predators the bacteria. Therefore to ensure a disease free swimming experience regular disinfection of the water is essential. Generally Chlorine is the disinfectant of choice and a residual has to be maintained to ensure complete disinfection as well as residual protection. Now for Chlorine to be effective the pH (Hydrogen Ion Concentration) of the water should preferably be between pH 6.5 to 7.5. Water below pH 6 or above pH 8 could be uncomfortable for skin. Now to be doubly sure that the chlorine dose is effective monitoring of harmful bacteria content is essential. However detection of these unseen predators is always a tedious and time consuming task in a laboratory by the conventional methods of microbiology. Now our AQUASOL AESPK - SWIMMING POOL TEST KIT helps in testing pH Chorine and Bacteria by anyone anywhere in a matter of a few minutes. Our ready to use kits helps to monitor the levels of Chlorine and pH on daily basis as well as has tests for harmful disease causing bacteria.
Key features
- Onsite Field Test Kit
- Easy To Follow Procedures
- Based on International Standards (APHA/AWWA/IS)
- Rapid and Accurate and Reliable results
- Available in portable carry case
- Tested and Validated by leading Laboratory
- Economical and long shelf life.
Product specification
| Parameter | Range |
| pH | 4 – 10 |
| Free Chlorine | 0.1 – 2.0 mg/l as Chlorine |
| Bacteria Tests | 6 Tests |
Good testing practice
- Collect a representative sample
- Use clean test vessels
- Follow the stated timing and procedure
- Record and trend the result
- Confirm critical results where necessary
Using this Aquasol test kit
How should Aquasol test kits be stored?
Store the kit in its original packaging under the conditions stated in the product literature. Keep reagents tightly closed, protected from excessive heat and direct sunlight, and check expiry details before use.
Can this kit replace a certified laboratory test?
Aquasol kits are intended for rapid field and routine monitoring. Regulatory, dispute, validation or critical release decisions may require confirmation using an approved laboratory method.
How can reliable results be obtained?
Use a representative sample, clean test vessels, follow the exact sequence and timing in the manual, avoid cross-contamination and record results immediately.