Portable water testing kits for field, laboratory and industrial monitoring+91-22-47804040 · WhatsApp
Aquasol · AE407

COD Test Kit

Chemical Oxygen Demand (COD) is defined as the amount of a specific oxidant that reacts with the sample under controlled conditions. The quantities of oxid

COD Test Kit
Product overview

COD Test Kit

Chemical Oxygen Demand (COD) is defined as the amount of a specific oxidant that reacts with the sample under controlled conditions. The quantities of oxidant consumed is expressed in terms of its oxygen equivalence. Because of Dichromate ions specific oxidant properties (CrO72-) unique chemical properties it gets reduced to the chromic ion (Cr3+) in COD test. COD is a defined test the extent of sample oxidation can be affected by digestion time reagent strength and sample COD concentration. COD is often used on a measurement of pollutants in waste water and natural water. To determine COD two methods are useful the open reflux method is suitable for a wide range of waste water and large sample size is preferred. Another is the closed reflux method is suitable for smaller quantities. It requires homogenisation of sample. Accurate measurement of sample values as well as reagent volumes and concentration are critical. Most type of organic matter are oxidised by a boiling mixture of Chromic and Sulphuric acid. A sample is heated in strongly acid solution with known excess of potassium dichromate. After digestion the remaining unreduced dichromate is titrated with Ferrous Ammonium Sulphate to determine the amount of dichromate consumed and the oxidized matter is calculated in terms of oxygen equivalent. Closed result method is used for AQUASOL AE407 - COD TEST KIT. This kit is applicable to COD values between 40 to 400 mg/l. Obtained high values by dilution.

Key features

  • Onsite Field Test Kit
  • Easy To Follow Procedures
  • Based on International Standards (APHA/AWWA/IS)
  • Rapid and Accurate and Reliable results
  • Available in portable carry case
  • Tested and Validated by leading Laboratory
  • Economical and long shelf life.

Product specification

  • Product Code: AE407
  • Range: 40 - 400 PPM (MG/L)
  • No of Tests: 100
  • HSN: 90275090
  • Packing: Plastic Case

Good testing practice

  • Collect a representative sample
  • Use clean test vessels
  • Follow the stated timing and procedure
  • Record and trend the result
  • Confirm critical results where necessary
Frequently asked questions

Using this Aquasol test kit

How should Aquasol test kits be stored?

Store the kit in its original packaging under the conditions stated in the product literature. Keep reagents tightly closed, protected from excessive heat and direct sunlight, and check expiry details before use.

Can this kit replace a certified laboratory test?

Aquasol kits are intended for rapid field and routine monitoring. Regulatory, dispute, validation or critical release decisions may require confirmation using an approved laboratory method.

How can reliable results be obtained?

Use a representative sample, clean test vessels, follow the exact sequence and timing in the manual, avoid cross-contamination and record results immediately.

WhatsApp us