Construction Water Combination Test Kit
Water is one of the most important component in construction and is required for the preparation of mortar and mixing of cement concrete and for curing wor
Construction Water Combination Test Kit
Water is one of the most important component in construction and is required for the preparation of mortar and mixing of cement concrete and for curing work etc. The quality of water used has a direct impact on the strength of the mortar and cement concrete in the construction work. Impurities in water can cause metal corrosion and introduce unwanted silt and clay into the concrete and adversely affect the hardening process of concrete and also reduce the strength by even 25%. Thus the need to ensure the quality of water used during construction is vital. AQUASOL AE 109 is specially designed for accurate reliable and easy Construction Water Analysis.
Key features
- Onsite Field Test Kit
- Easy To Follow Procedures
- Based on International Standards (APHA/AWWA/IS)
- Rapid and Accurate and Reliable results
- Available in portable carry case
- Tested and Validated by leading Laboratory
- Economical and long shelf life.
Product specification
| Parameters | Product Range |
| Calcium Hardness | 25 – 500 PPM (MG/L) |
| Chloride | 10 – 200 and 50 – 2000 PPM (MG/L) |
| Acidity | 10 – 200 and 50 – 1000 PPM (MG/L) |
| Alkalinity | 10 – 200 and 50 – 1000 PPM (MG/L) |
| Sulphate | 10 – 200 PPM (MG/L) |
| pH | 0 - 14 |
| TDS | 0 – 9990 PPM (MG/L) |
Good testing practice
- Collect a representative sample
- Use clean test vessels
- Follow the stated timing and procedure
- Record and trend the result
- Confirm critical results where necessary
Using this Aquasol test kit
How should Aquasol test kits be stored?
Store the kit in its original packaging under the conditions stated in the product literature. Keep reagents tightly closed, protected from excessive heat and direct sunlight, and check expiry details before use.
Can this kit replace a certified laboratory test?
Aquasol kits are intended for rapid field and routine monitoring. Regulatory, dispute, validation or critical release decisions may require confirmation using an approved laboratory method.
How can reliable results be obtained?
Use a representative sample, clean test vessels, follow the exact sequence and timing in the manual, avoid cross-contamination and record results immediately.