RO Plant Water Combination Test Kit
Reverse Osmosis (RO) is a modern process to purify water for a wide range of applications including semiconductors boiler feed water treatment food process
RO Plant Water Combination Test Kit
Reverse Osmosis (RO) is a modern process to purify water for a wide range of applications including semiconductors boiler feed water treatment food processing biotechnology pharmaceuticals power generation seawater desalting and municipal drinking water.
Key features
- Onsite Field Test Kit
- Easy To Follow Procedures
- Based on International Standards (APHA/AWWA/IS)
- Rapid and Accurate and Reliable results
- Available in portable carry case
- Tested and Validated by leading Laboratory
- Economical and long shelf life.
Product specification
| Parameters | Product Range |
| pH | 4 to 10 |
| Total Hardness | 2-40 and 25-500 PPM (MG/L) |
| Calcium Hardness | 5-100 PPM (MG/L) |
| Silica | 5 and 10 and 20 and 40 and 60 and 80 PPM (MG/L) |
| Sulphate | 10-200 and 50-1000 PPM (MG/L) |
| Iron (Dissolved) | 0 - 2.0 PPM (MG/L) |
| Nitrate | 0.5-50 PPM (MG/L) |
| Nitrite | 0.025-0.8 PPM (MG/L) |
Good testing practice
- Collect a representative sample
- Use clean test vessels
- Follow the stated timing and procedure
- Record and trend the result
- Confirm critical results where necessary
Using this Aquasol test kit
How should Aquasol test kits be stored?
Store the kit in its original packaging under the conditions stated in the product literature. Keep reagents tightly closed, protected from excessive heat and direct sunlight, and check expiry details before use.
Can this kit replace a certified laboratory test?
Aquasol kits are intended for rapid field and routine monitoring. Regulatory, dispute, validation or critical release decisions may require confirmation using an approved laboratory method.
How can reliable results be obtained?
Use a representative sample, clean test vessels, follow the exact sequence and timing in the manual, avoid cross-contamination and record results immediately.