Boiler Water Combination Test Kit
Boilers are systems which generate steam which consists of two principal parts: the furnace which provides heat usually by burning a fuel and the Boiler pr
Boiler Water Combination Test Kit
Boilers are systems which generate steam which consists of two principal parts: the furnace which provides heat usually by burning a fuel and the Boiler proper a device in which the heat changes water into steam. The steam or hot fluid is then recirculated out of the boiler for use in various processes for heating applications. Proper pre-treatment of Boiler feed water is an important part of operating and maintaining a boiler system. As steam is produced dissolved solids become concentrated and form deposits inside the boiler. This leads to poor heat transfer and reduces the efficiency of the boiler. Dissolved gasses such as oxygen and carbon dioxide will react with the metals in the boiler system and lead to boiler corrosion. In order to protect the boiler from these contaminants they should be eliminated or at least through external or internal treatment. Our AE102 - BOILER WATER COMBINATION TEST KIT is easy to use and gives reliable and caccurate results.
Key features
- Onsite Field Test Kit
- Easy To Follow Procedures
- Based on International Standards (APHA/AWWA/IS)
- Rapid and Accurate and Reliable results
- Available in portable carry case
- Tested and Validated by leading Laboratory
- Economical and long shelf life.
Product specification
| Parameters | Product Range |
| Total Hardness | 2-40 and 5-100 and 25-500 PPM (MG/L) |
| Calcium Hardness | 5-100 PPM (MG/L) |
| Alkalinity | 10- 200 and 100-2000 PPM (MG/L) |
| Chloride | 10-200 and 50-1000 PPM (MG/L) |
| pH | 4 to 10 |
| Iron (Dissolved) | 0 - 2.0 PPM (MG/L) |
| Silica | 5 - 80 PPM (MG/L) |
| Phosphate | 0 - 40 PPM (MG/L) |
| Free Chlorine | 0.1-2.0 PPM (MG/L) |
Good testing practice
- Collect a representative sample
- Use clean test vessels
- Follow the stated timing and procedure
- Record and trend the result
- Confirm critical results where necessary
Using this Aquasol test kit
How should Aquasol test kits be stored?
Store the kit in its original packaging under the conditions stated in the product literature. Keep reagents tightly closed, protected from excessive heat and direct sunlight, and check expiry details before use.
Can this kit replace a certified laboratory test?
Aquasol kits are intended for rapid field and routine monitoring. Regulatory, dispute, validation or critical release decisions may require confirmation using an approved laboratory method.
How can reliable results be obtained?
Use a representative sample, clean test vessels, follow the exact sequence and timing in the manual, avoid cross-contamination and record results immediately.