Cooling Water Combination Test Kit
Water is required to be cooled for many processes for example air conditioners manufacturing processes or power generation etc. A cooling tower is used to
Cooling Water Combination Test Kit
Water is required to be cooled for many processes for example air conditioners manufacturing processes or power generation etc. A cooling tower is used to reduce the temperature of a water stream by extracting heat from water and emitting it to the atmosphere. Cooling towers make use of evaporation whereby some of the water is evaporated into a moving air stream and subsequently discharged into the atmosphere. As a result the remainder of the water is cooled down significantly. Water by its basic nature is corrosive. Therefore cooling systems are plagued with corrosion. Many factors affect corrosion rates in a given cooling water system. The presence of dissolved gases chloride and sulfate levels pH alkalinity scaling tendency and protective ions such as calcium magnesium phosphate nitrate and silicate must all be taken into consideration. The first step to control is detection therefore regular monitoring of the above is absolutely essential.
Key features
- Onsite Field Test Kit
- Easy To Follow Procedures
- Based on International Standards (APHA/AWWA/IS)
- Rapid and Accurate and Reliable results
- Available in portable carry case
- Tested and Validated by leading Laboratory
- Economical and long shelf life.
Product specification
| Parameters | Product Range |
| Total Hardness | 2-40 and 5-100 and 25-500 PPM (MG/L) |
| Calcium Hardness | 5-100 PPM (MG/L) |
| Alkalinity | 10- 200 and 100-2000 PPM (MG/L) |
| Chloride | 10-200 and 50-1000 PPM (MG/L) |
| pH | 4 to 10 |
| Iron (Dissolved) | 0 - 2.0 PPM (MG/L) |
| Silica | 5 - 80 PPM (MG/L) |
| Phosphate | 0 - 40 PPM (MG/L) |
| Free Chlorine | 0.1-2.0 PPM (MG/L) |
Good testing practice
- Collect a representative sample
- Use clean test vessels
- Follow the stated timing and procedure
- Record and trend the result
- Confirm critical results where necessary
Using this Aquasol test kit
How should Aquasol test kits be stored?
Store the kit in its original packaging under the conditions stated in the product literature. Keep reagents tightly closed, protected from excessive heat and direct sunlight, and check expiry details before use.
Can this kit replace a certified laboratory test?
Aquasol kits are intended for rapid field and routine monitoring. Regulatory, dispute, validation or critical release decisions may require confirmation using an approved laboratory method.
How can reliable results be obtained?
Use a representative sample, clean test vessels, follow the exact sequence and timing in the manual, avoid cross-contamination and record results immediately.